uk
  • fr
  • es
  • de
  • nl


Cut 5. Heat contact 3. With aramid outlayer. Cotton lined.

Réf.TKV7PXL
     [ Cut level 5 ] [ Heat contact level  3 ]Safety gloves. Siz...
Continue
Documentation :
View FileTKV7P (Download PDF datasheet)
SIZE Availabilities
  • 11 only
Description

    


[ Cut level 5 ] 
[ Heat contact level  3 ]

Safety gloves. Size 11.
7 gauge. Seamless knitter liner. 
Special 2 layers.
Outer layer made of 100% Kevlar® fibres.  Inside layer made of 100% cotton fibres to assist in ventilation, comfort and insulation.
Uncoated. 34 cm length. Reversible (ambidextrous).
Yellow colour.


Kevlar® is  registered trademark of E.I. du Pont de Nemours and Company

Standard(s) of products
  • EN420
  • EN388 2 5 4 1 C
  • EN407 4 3 4 3 2 X
Advantage(s)
ISO9001 system in production.
This glove benefits from the advantage of the international reputation of the Kevlar® fibre, providing you many recognized resistances against: cut, abrasion, heat...
A very good protection for the user.
Enhanced comfort of a seamless glove.
Type(s) of uses
Thanks to its technical characteristics, this glove is suitable for all major works requiring a good protection against mechanical risks including cut (cut level 5, as per EN388 European standard) and thermal risks including contact heat (contact heat level 3 as per EN407 European standard).
Metallurgy, paper mill, cardboard factory, industry, motor industry......
(Type of use is given as a guide only. It is to the end user to check whether the product is suitable or not for the intended use. Before any use, read carefully the instructions enclosed with the product).
Safety precautions
Store sheltered from sunlight.
Read carefully the instructions enclosed with the product before use.
Check that this equipment is suitable for the intended use.
It is brought to the attention of the user that no glove, even with mechanical resistance according to EN388, is impossible to abrade, cut, tear or puncture.
These gloves resist to cuts but are not cut proof.
Do not subject to high speed or serrated blades.
Gloves shall not be worn when there is a risk of entanglement by moving parts of machines.
For reasons of safety and hygiene, this product is for personal use only.
Worn or damaged products must not be used and must be replaced.
Packaging
Carton of 50 pairs.
Each pair individually packed.
Certification
This glove has been tested as per the following European standards:
- EN 420 : 2003 +A1 : 2009. Protective gloves - General requirements and test methods.
- EN 388 : 2016. Protective gloves against mechanical risks.
- EN 407 : 2004. Protective gloves against thermal risks (heat and/or fire).
It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE). Category III.
EU type-examination certification (Module B) issued by SATRA (Irland). Notified body n°2777.
The PPE is subject to the conformity assessment procedure based on quality assurance of the production process (Module D) set out in Annex VIII (Category III) under surveillance of SGS.
Notified body n°0120.

Download the EU declaration of conformity on:

http://docs.singer.fr

We also
advice you

Interested in this product ?

Haut de page
Interested in this product ?
Contact us
+33 (0)3 28 28 29 00